Introduction and principle of high gloss processing

    Edit:China Manufacturing      View times      Time:6/23/2021 7:52:22 PM    Print

Introduction and principle of high gloss processing

Strictly speaking, high-gloss processing does not belong to pre-processing, but post-processing. The high-gloss processing parts have high gloss and are equipped with thick and thin knife lines. Using the principle of refraction, the decorative effect can be greatly enhanced.

The principle of high-gloss cutting is: the diamond tool is sharp, the hardness is high, the machined surface is extremely flat, the smoothness is high, and the chip removal is easy, there is no accumulation of chips at the cutting edge during cutting, and the cutting surface is guaranteed to be bright .

Several characteristics of high-gloss cutting :

( 1 ) High-gloss cutting processing equipment: precision engraving machine (small CNC ).

( 2 ) high light cutting machining principle: Capsules natural diamond knife holder to the high-speed rotation (rotational speed of typically 20,000 revolutions / min) cutting up the engraving machine spindle part, the tool is fixed in the pre-programmed exercise programs, Finally, a local highlight area is generated on the surface of the product.

( 3 ) High-gloss cutting materials suitable for processing: aluminum, copper, and stainless steel.

( 4 ) The difference between processing different materials:

When precision-carved machining aluminum, its brightness is the brightest, and the wear on the tool is the least;

When the precision carving machine is processing copper, its brightness is relatively bright, and the wear to the tool is the second;

When the stainless steel is processed by the engraving machine, its brightness is gray and matte, and the wear on the tool is the greatest.

( 5 ) Further, in addition to doing a high light-carved (inverted C angle), but also words and highlighted gong can take 3D arc of 3D high gloss.

( 6 ) The angles of the processed blades are 30 degrees Celsius, 45 degrees Celsius, 60 degrees Celsius, 75 degrees Celsius, 90 degrees Celsius, 130 degrees Celsius, 140 degrees Celsius, 160 degrees Celsius, etc.

The high-gloss machine is named according to the characteristics of its processed products. Its appearance is similar to an engraving machine (or a precision engraving machine). The main shaft adopts an air-floating main shaft of 100000RPM . When processing the product, it achieves a mirror effect and no knife lines are visible.

There are also many aliases for high gloss machines, such as chamfering machines, bright edge machines, chamfering highlight machines, etc. High gloss machines have higher technical requirements, and the requirements for accessories are much higher than those of ordinary engraving machines.